2000 Toyota Tundra 4.7 Throttle Body Cleaning
Or disconnect the intake hose and give a scrub with a tooth brush rag and Seafoam.
2000 toyota tundra 4.7 throttle body cleaning. Remove hoses running to intake. 2000 tundra 47 code was throttle position sensor. Loosen band clamp attaching intake to throttle body.
Then it will accelerate but nothing during 1st half of pedal. Before I replaced the throttle body the truck idled at 760 or so. Once free take off the engine covering to expose the engine.
Pull upper intake off tb and set aside. Youll notice better throttle response and a peppy feel. All fit 2000-2021 Toyota Tundra and more.
Road test the vehicle to verify normal operation. Pull tb out enough to Unclip coolant lines. Remember where everything plugs in and get the baby sparklin Throttle body cleaner.
A long narrow plastic item to hold the butterfly valve on the throttle body open. It had 2 codes that helped me replac. It is clean inside.
Use rags to catch the drippings. Sometimes when sitting at a stop light it almost dies out like its trying to idle at 3 or 400 hundred rpm. Using the same 10mm socket remove the nut attaching the air conditioning line to the intake tube of the.