2013 Toyota Tundra Tpms Reset

Hold the TPMS reset button until the tire pressure light blinks three times then release it.

2013 toyota tundra tpms reset. Drive the vehicle for 10-30. Ensure all tires are inflated to the pressure listed on the tire placard. Toyota Tundra TPMS Reset Procedure If this is your first visit to The TPMS Forum be sure to check out the FAQ by clicking the link above.

Toyota TPMS Relearn Procedure Note. You need a TPMS Scan tool to Relearn the TPMS sensors on these Toyota Car Model. No matter what I do with the TPMS button it has no effect.

Inflate all tires to pressure indicated on tire placard. The first three mins and twelve seconds is the backstory which you may be experiencing the exact same thing. If the tire pressure warning light does not blink turn ignition switch to OFF.

Start the car and wait 20 minutes for the sensor to refresh. Hold down tire pressure reset button located on instrument panel knee bolster or inside glove box until TPMS telltale. Turn ignition to ON position engine off 3.

Toyota Tundra Huf IntelliSens TPMS Sensor Set 42607-0C070 315MHz - Rubber Valve Stem. Like all modern cars trucks and crossovers Toyotas have a Tire Pressure Monitoring System TPMS. In my case it was TPMS code 22 which flashed like this.

In the TPMS tool when looking up TPMS sensors or kits for replacement be sure to select the correct manufactured alloy or steel wheels to find the correct part number. Press the Tire Pressure Reset button three times. The Toyota Tundra had the option of alloy or steel wheels during manufacturing years 2006-2013.